TB-9-2320-302-13-P-3

CREW PROTECTION KIT; AIR CONDITIONING KIT PART 3 OF 3

TECHNICAL BULLETIN; OPERATOR’S, UNIT, AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST

MARCH 2008
TB-9-2320-302-13-P-3

  TB-9-2320-302-13-P-3 - Page 14 of 240

TB 9-2320-302-13&P-3
iv
CONTENTS OF THIS BULLETIN - CONTINUED
8.
Chapter 6,
Supporting Information.
This chapter includes
Reference
s,
Maintenance Allocation Chart (MAC)
Introduction
,
Maintenance Allocation Chart (MAC)
,
Expendable and Durable Items List
,
Torque Limits
,
A/C Kit
Installation Instructions
,
Repair Parts and Special Tools List (RPSTL) Introduction
, and
Repair Parts and Special Tools
List (RPSTL)
.
FEATURES OF THIS BULLETIN
1.
WARNINGs, CAUTIONs, NOTEs, subject headings, and other important information are highlighted in
BOLD
print as
a visual aid.
WARNING
A WARNING indicates a hazard which may cause injury or death to personnel.
CAUTION
A CAUTION is a reminder of safety practices or directs attention to usage practices that may cause damage
to equipment.
NOTE
A NOTE is a statement containing information that will make the procedures easier to perform.
2.
Statements and words of particular interest may be printed in CAPITAL LETTERS to create emphasis.
3.
Within a procedural step, reference may be made to another work package in this bulletin or to another publication.
These references indicate where you should look for more complete information.
a.
If you are told: “Refer to
A/C Kit Installation Instructions
(WP 0027 00)”, go to WP 0027 00 in this bulletin for
instructions on this procedure.
b.
If you are told: “For complete information on M915A2 Operator PMCS, refer to TM 9-2320-302-10”, go to
References
in WP 0022 00 for complete information on the cited reference.
4.
Illustrations are placed after, and as close to, the procedural steps to which they apply. Callouts placed on the art are text
or numbers.
5.
Numbers located at lower right corner of art (e.g., 449-001; 449-002, etc.) are art control numbers and are used for
tracking purposes only.
6.
Technical instructions include metric units as well as standard units. For your reference, a
Metric Conversion Chart
is
located on the inside back cover of the bulletin.


Back to Top