TB-9-2320-302-13-P-3
CREW PROTECTION KIT; AIR CONDITIONING KIT PART 3 OF 3
TECHNICAL BULLETIN; OPERATOR’S, UNIT, AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
MARCH 2008
TB-9-2320-302-13-P-3 - Page 8 of 240
TB 9-2320-302-13&P-3
f
•
Solvent cleaning compound MIL-PRF-680 Type II and III may be irritating to the eyes and skin. Use
protective gloves and goggles. Use in well-ventilated areas. Use respirator as needed. Accidental inges-
tion can cause irritation of digestive tract and respiratory tract, may cause lung and central nervous sys-
tem damage. Can be fatal if swallowed. Inhalation of high/massive concentrations can cause coma or be
fatal. First aid for ingestion: do not induce vomiting. Seek immediate medical attention. First aid for
skin contact: remove contaminated clothing. Wash skin thoroughly with soap and water. If symptoms
persist, seek medical attention. First aid for eye contact: flush with water for 15 minutes or until irrita-
tion subsides. If symptoms persist, seek medical attention. First aid for inhalation: move to fresh air. If
not breathing, provide artificial respiration. If symptoms persist, seek medical attention. Keep away
from open flames and other sources of ignition.
•
The flashpoint for type II solvent cleaning compound is 141-198°F (61-92°C) and type III is 200-241°F
(93-116°C).
•
Improper cleaning methods and use of unauthrized cleaning solvents may injure personnel and damage
equipment.
•
Fire extinguishers should be placed nearby when using solvent cleaning compound.
•
Cloths or rags saturated with solvent cleaning compound must be disposed of IAW authorized facilities’
procedures.
•
Eye shields must be worn when cleaning with a wire brush. Flying rust and metal particle may cause
injury.
•
Failure to follow these warnings may result in injury or death to personnel.
WARNING
HAZARDOUS WASTE
When servicing this vehicle, performing maintenance, or disposing of materials such as engine coolant,
hydraulic fluid, lubricants, battery acids or batteries, and CARC paint, consult your unit/local hazardous
waste disposal center or safety office for local regulatory guidance. If further information is needed, please
contact The Army Environmental Hotline at 1-800-872-3845.
To ensure survivability of personnel, welding repairs on armor kit are NOT authorized. If armor plates are
damaged, they must be replaced. Failure to follow this warning may cause failure of armor, resulting in
injury or death to personnel.
WARNING
SOLVENT CLEANING COMPOUND
WARNING
WELDING
Back to Top
