TB-9-2320-335-13-P

TRUCK, UTILITY: EXPANDED CAPACITY, IAP/ARMOR READY

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE AND REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) INSTRUCTIONS

MAY 2008

TB-9-2320-335-13-P - Page 140 of 680

TB 9-2320-335-13&P

4-2

4-14.1. INSTRUMENT CLUSTER (ELECTRONIC) REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Manual References

TM 9-2320-387-10

TB 9-2320-335-13&P, Appendix E

Equipment Condition

Speedometer/odometer (electronic) removed

(para. 4-17.1).

Maintenance Level

Unit

NOTE

Prior to removal, tag leads for installation.

1.

Remove capscrew (12), grounds 58M (13) and 57G (14), and washer (15) from instrument cluster (18).

2.

Disconnect harness leads 36A (1), 567A (2), 40C (3), 57L (5), 17B (6), 27G (7), 33A (8), 27J (22),

40W (23), 28A (21), and 27W (24) from instrument cluster (18).

3.

Remove four nuts (9), (11), (17) and (20), and ground wires 58E (4), 58F (10), 58G (16), and 58H (19)

from instrument cluster (18).

1.

Install four nuts (9), (11), (17) and (20), and ground wires 58E (4), 58F (10), 58G (16), and 58H (19)

on instrument cluster (18).

2.

Connect harness leads 36A (1), 567A (2), 40C (3), 57L (5), 17B (6), 27G (7), 33A (8), 27J (22),

28A (21), 40W (23), and 27W (24) to instrument cluster (18).

3.

Install capscrew (12), grounds

58M (13) and 57G (14) and washer (15) on instrument cluster (18).

b. Installation

a. Removal