TB-9-2320-335-13-P
TRUCK, UTILITY: EXPANDED CAPACITY, IAP/ARMOR READY
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE AND REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) INSTRUCTIONS
MAY 2008
TB-9-2320-335-13-P - Page 144 of 680
TB 9-2320-335-13&P
4-6
4-18.1. SPEEDOMETER HARNESS ASSEMBLY REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Two tiedown straps (Appendix A, Item 324)
Two locknuts (Appendix A, Item 73.1)
Manual References
TM 9-2320-387-10
TM 9-2320-387-24-2
TM 9-2320-335-13&P, Appendix E
Equipment Condition
• Hood raised and secured (TM 9-2320-387-10).
• Instrument cluster (electronic) removed
(para. 4-14.1).
• Sender generator (electronic) removed
(para. 5-17.1).
• Engine access cover removed
(TM 9-2320-387-24-2).
Maintenance Level
Unit
NOTE
• Prior to removal, tag leads for installation.
• Jumper wires on rear of instrument cluster can be replaced
separately.
• Rotate speedometer harness under body harness to keep body
harness from laying on transmission.
1.
Remove locknut (5), capscrew (7), harnesses (3) and (4), and clamp (6) from cowl (8).
Discard locknut (5).
2.
Remove locknut (9), capscrew (2), clamp (1), and harnesses (3) and (4) from cowl (8).
Discard locknut (9).
a. Removal
1
2
3
4
5
6
7
~
8
9
FRONT
OF
VEHICLE
Back to Top
