TB-9-2320-335-13-P
TRUCK, UTILITY: EXPANDED CAPACITY, IAP/ARMOR READY
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE AND REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) INSTRUCTIONS
MAY 2008
TB-9-2320-335-13-P - Page 150 of 680
TB 9-2320-335-13&P
4-12
4-26.1. HORN REPLACEMENT (SERIAL NUMBERS 300000 AND ABOVE)
1.
Disconnect wires 26A (6) and 25C (5) from horn (7).
2.
Remove two capscrews (4), lockwashers (3), washers (2), and horn (7) from horn bracket (1).
Discard lockwashers (3).
1.
Install horn (7) on horn bracket (1) with two washers (2), lockwashers (3), and capscrews (4).
2.
Connect wires 26A (6) and 25C (5) to horn (7).
b. Installation
a. Removal
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Two lockwashers (Appendix A, Item 146)
Manual References
TM 9-2320-387-24P
Equipment Condition
Battery cables disconnected (para. 4-68).
Maintenance Level
Unit
FOLLOW-ON TASK: Connect battery cables (para. 4-68).
1
2
4
5
6
7
3
Back to Top
