TB-9-2320-335-13-P

TRUCK, UTILITY: EXPANDED CAPACITY, IAP/ARMOR READY

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE AND REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) INSTRUCTIONS

MAY 2008

TB-9-2320-335-13-P - Page 169 of 680

TB 9-2320-335-13&P

6-5

6-7. HALFSHAFT MAINTENANCE

This task covers:

a. Removal

d. Wear Sleeve Installation

b. Disassembly

e. Assembly

c. Cleaning and Inspection

f. Installation

1.

Remove access plug (8) and washer (7) from geared hub (4).

2.

Remove halfshaft retaining capscrew (6) and lockwasher (5) from halfshaft (9) and geared hub (4).

Discard lockwasher (5).

3.

Remove six capscrews (3), two-piece lockwashers (2), and halfshaft (9) from rotor (1) and output

flange (10). Discard two-piece lockwashers (2).

NOTE

Perform steps 4 and 5 for rear halfshafts only.

4.

Remove cotter pin (15), washer (16), clevis pin (18), and parking brake clevis (17) from lever (14).

Discard cotter pin (15).

5.

Remove clip (13) and disconnect cable (11) from caliper cable bracket (12). Discard clip (13).

a. Removal

8

7

6

5

4

9

10

1

2

3

12

13

14

15

16

17

11

Tools

General mechanic’s tool kit:

automotive (Appendix

B, Item 1)

Maintenance and repair shop equipment:

automotive (Appendix B, Item 2)

Materials/Parts

Boot service kit (Appendix A, Item 4)

Clip (Appendix A, Item 11)

Cotter pin (Appendix A, Item 19)

Six two-piece lockwashers

(Appendix A, Item 191)

Lockwasher (Appendix A, Item 156)

Drycleaning solvent (Appendix C, Item 26)

Lithium grease (Appendix C, Item 36)

Sealing compound (Appendix C, Item 63)

Wear sleeve (Appendix A, Item 311.1)

Manual References

TM 9-2320-387-24P

Equipment Condition

• Wheel removed (TM 9-2320-387-24-1).

• Brake protection guards removed

(para. 7-11.1).

General Safety Instructions

Drycleaning solvent is flammable and will not be

used near an open flame.

Maintenance Level

Unit