TB-9-2320-335-13-P

TRUCK, UTILITY: EXPANDED CAPACITY, IAP/ARMOR READY

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE AND REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) INSTRUCTIONS

MAY 2008

TB-9-2320-335-13-P - Page 160 of 680

TB 9-2320-335-13&P

5-10

5-17.2. SPEEDOMETER DRIVEN GEAR (ELECTRONIC) REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Maintenance and repair shop equipmentL

automotive (Appendix B, item 2)

Materials/Parts

O-ring (Appendix G, Item 219)

Manual References

TM 9-2320-387-10

TM 9-2320-387-24P

Equipment Condition

Sender generator (electronic) removed

(para. 5-17.1).

Maintenance Level

Unit

1.

Remove capscrew (2) and clamp (3) from pinion adapter (1) and transfer case (6).

2.

Pull pinion adapter (1) out of transfer case (6).

3.

Remove O-ring (4) from pinion adapter (1). Discard O-ring (4).

4.

Remove driven gear (5) from transfer case (6).

1.

Install O-ring (4) on pinion adapter (1).

2.

Install driven gear (5) into pinion adapter (1).

3.

Install and align pinion adapter (1) into transfer case (6) with clamp (3) and capscrew (2). Tighten

capscrew (2) to 15 lb-ft (20 N

•

m).

b. Installation

a. Removal