TB-9-2320-335-13-P

TRUCK, UTILITY: EXPANDED CAPACITY, IAP/ARMOR READY

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE AND REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) INSTRUCTIONS

MAY 2008

TB-9-2320-335-13-P - Page 179 of 680

1.

Remove four capscrews (5), washers (4), two clamps (3), and stabilizer bar (6) from two

frame brackets (1).

2.

Remove two stabilizer bar bushings (2) from stabilizer bar (6).

1.

Install two stabilizer bar bushings (2) on stabilizer bar (6).

2.

Install stabilizer bar (6) on two frame brackets (1) with two clamps (3), four washers (4), and

capscrews (5). Tighten capscrews (5) to 39–47 lb-ft (53–63 N

•

m).

b. Installation

a. Removal

6-20.1. STABILIZER BAR REPLACEMENT (SERIAL NUMBERS 3000000 AND ABOVE)

This task covers:

a. Removal

b.

Installation

TB 9-2320-335-13&P

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Maintenance and repair shop equipment:

automotive (Appendix B, Item 2)

Manual References

TB 9-2320-335-13&P, Appendix E

Equipment Condition

Stabilizer bar link removed

(TM 9-2320-387-24-1)

Maintenance Level

Unit

6-15/(6-16 blank)

2

3

4

5

6

1