TB-9-2320-335-13-P

TRUCK, UTILITY: EXPANDED CAPACITY, IAP/ARMOR READY

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE AND REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) INSTRUCTIONS

MAY 2008

TB-9-2320-335-13-P - Page 224 of 680

8-4.1. RADIAL TIRE, WHEEL, AND RUBBER RUNFLAT MAINTENANCE (24-STUD) (Cont’d)

9.

Lay tire (1) flat.

WARNING

Do not use compressor strap if it is frayed or damaged. Ensure

runflat is free of grease and runflat compressor strap is centered

around runflat. Failure to do so may cause injury to personnel.

NOTE

Perform steps 10 and 11 when using runflat compressor P/N

J39250. Perform steps 12 and 13 when using runflat compressor

P/N 528236.

10.

Position runflat compressor (3) on runflat (2) so that runflat compressor hex-drive (4) is facing up

and strap (5) is centered around runflat (2).

NOTE

Compress runflat by rotating hex-drive in either direction. Rotate

hex-drive the opposite direction to loosen.

11.

Using runflat compressor (3), compress runflat (2).

12.

Position runflat compressor (6) on outer edge of runflat (2) with handle assembly (7) facing up and

strap (8) centered around runflat (2).

NOTE

Compress runflat by rotating handle assembly in a clockwise

direction. Rotate handle assembly counterclockwise to loosen.

13.

Using runflat compressor (6), compress runflat (2).

NOTE

• It may be necessary to use a tire spoon and tire soap to remove

runflat from tire.

• When using runflat compressor P/N 528236, handle may need to

be removed before removing runflat.

14.

Remove runflat (2) from tire (1) and remove runflat compressor (3) or (6) from runflat (2).

TB 9-2320-335-13&P

8-4