TB-9-2320-335-13-P

TRUCK, UTILITY: EXPANDED CAPACITY, IAP/ARMOR READY

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE AND REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) INSTRUCTIONS

MAY 2008

TB-9-2320-335-13-P - Page 246 of 680

TB 9-2320-335-13&P

8-26

18.

Loosen clamp (2) and remove return hose (3) from outlet tube (1) of oil cooler (7).

19.

Loosen clamp (5) and remove return hose (4) from inlet tube (6) of oil cooler (7).

20.

Loosen nut (17) and disconnect pressure hose (8) from steering gear inlet adapter (16).

21.

Remove steering gear inlet adapter (16) and O-ring (15) from steering gear (14). Discard O-ring (15).

22.

Loosen nut (11) and disconnect return hose (3) from steering gear outlet adapter (12).

23.

Remove steering gear outlet adapter (12) and O-ring (13) from steering gear (14). Discard O-ring (13).

24.

Loosen clamp (9) and disconnect return hose (3) from 90° fitting (10).

1.

Connect return hose (3) on 90° fitting (10) with clamp (9).

2.

Install steering gear outlet adapter (12) and O-ring (13) on steering gear (14).

3.

Connect return hose (3) on steering gear outlet adapter (12) and tighten nut (11).

4.

Install steering gear inlet adapter (16) and O-ring (15) on steering gear (14).

5.

Connect pressure hose (8) on steering gear inlet adapter (16) and tighten nut (17).

6.

Install return hose (4) on inlet tube (6) of oil cooler (7) and tighten clamp (5).

7.

Install return hose (3) on outlet tube (1) of oil cooler (7) and tighten clamp (2).

b. Installation

8-24.2. POWER STEERING HYDRAULIC SYSTEM PRESSURE AND RETURN HOSES

REPLACEMENT (SERIAL NUMBERS 300000 AND ABOVE) (Cont’d)