TB-9-2320-335-13-P
TRUCK, UTILITY: EXPANDED CAPACITY, IAP/ARMOR READY
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE AND REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) INSTRUCTIONS
MAY 2008
TB-9-2320-335-13-P - Page 255 of 680
9-5.1. RADIATOR FRONT MOUNT BRACKET REPLACEMENT
(SERIAL NUMBERS 300000 AND ABOVE)
TB 9-2320-335-13&P
9-3
This task covers:
a. Removal
b. Installation
1.
Remove locknut (15), capscrew (7), washer (8), washer (9), insulator (10), washer (14), and
insulator (13) from radiator (1) and front mount bracket (6). Discard locknut (15).
2.
Remove two locknuts (11), washers (12), capscrews (2), washers (3), front mount bracket (6), and
bracket (4) from front suspension crossmember (5). Discard locknuts (11).
1.
Install bracket (4) and front mount bracket (6) on front suspension crossmember (5) with two
washers (3), capscrews (2), washers (12), and locknuts (11). Tighten locknut (11) to 90 lb-ft (122 N
•
m).
2.
Secure front mount bracket (6) to radiator (1) with insulator (10), washer (9), washer (8),
capscrew (7), insulator (13), washer (14), and locknut (15). Tighten locknut (15) to
30 lb-ft (41 N
•
m).
b. Installation
a. Removal
FOLLOW-ON TASK: Install horn (para. 4-26.1).
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Two locknuts (Appendix A, Item 114.4)
Locknut (Appendix A, Item 114.3)
Manual References
TM 9-2320-387-24-1
TB 9-2320-335-13&P, Appendix E
Equipment Condition
Horn removed (para. 4-26.1).
Maintenance Level
Unit
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
âž¡
Front of vehicle
Back to Top
