TB-9-2320-335-13-P

TRUCK, UTILITY: EXPANDED CAPACITY, IAP/ARMOR READY

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE AND REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) INSTRUCTIONS

MAY 2008

TB-9-2320-335-13-P - Page 268 of 680

TB 9-2320-335-13&P

10-6

10-23.1. ENGINE LEFT SPLASH SHIELD MAINTENANCE

(SERIAL NUMBERS 300000 AND ABOVE) (Cont’d)

1.

Install splash shield (3) on master cylinder bracket (15) with washer (16), capscrew (17), and

locknut (14).

2.

Install splash shield (3) on lower airlift bracket (20) with washer (18), capscrew (19), washers (13)

and (12), and locknut (11).

3.

Install splash shield (3) on airlift bracket (10) with washer (21), lockwasher (22), and capscrew (23).

4.

Install splash shield (3) on support bracket (26) with washer (25), capscrew (24), washer (39), and

locknut (38).

5.

Install valve (8) on splash shield (3) with nut (7).

6.

Install harness and clamp assembly (4) on splash shield (3) with capscrew (6) and nut and

lockwasher assembly (5).

7.

Install connector (2) on plate (31) with four capscrews (32) and nuts (33).

8.

Install spring nuts (37) and (30) on plate (31).

9.

Install plate (31) on headlight housing (35) with hex-head screws (36) and (34).

10.

Install plate (31) on splash shield bracket (9) with four washers (29), lockwashers (28), and

capscrews (27).

11.

Connect hood harness (1) to connector (2).

d. Installation