TB-9-2320-335-13-P

TRUCK, UTILITY: EXPANDED CAPACITY, IAP/ARMOR READY

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE AND REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) INSTRUCTIONS

MAY 2008

TB-9-2320-335-13-P - Page 274 of 680

TB 9-2320-335-13&P

10-12

10-24.1. ENGINE RIGHT SPLASH SHIELD MAINTENANCE

(SERIAL NUMBERS 300000 AND ABOVE) (Cont’d)

1.

Install splash shield (1) on airlift bracket (9) with washer (5), lockwasher (4), and capscrew (3).

2.

Install harness (37) and clamp (38) on splash shield (1) with capscrew (2), washer (36), and

locknut (35).

3.

Install splash shield (1) on lower airlift bracket (8) with washer (33), capscrew (34), washer (6), and

locknut (7).

4.

Secure splash shield (1) to airlift bracket (9) with washer (30), lockwasher (31), and capscrew (32).

Tighten capscrew (32) to 15 lb-ft (20 N·m).

5.

Install splash shield (1) on support bracket (27) with washer (28), capscrew (29), washer (11), and

locknut (12).

6.

Install connector (20) on plate (19) with four capscrews (18) and nuts (21).

7.

Install spring nuts (15) and (23) on plate (19).

8.

Install plate (19) on headlight housing (14) with hex-head screws (13) and (22), harness (16), and

clamp (17).

9.

Install plate (19) on splash shield (1) with four washers (26), lockwashers (25), and capscrews (24).

10.

Connect hood harness (39) to connector (20).

d. Installation