TB-9-2320-335-13-P
TRUCK, UTILITY: EXPANDED CAPACITY, IAP/ARMOR READY
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE AND REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) INSTRUCTIONS
MAY 2008
TB-9-2320-335-13-P - Page 280 of 680
TB 9-2320-335-13&P
10-96. SPARE TIRE CARRIER REPLACEMENT
10-18
This task covers:
a. Removal
b.
Installation
1.
Remove pin (3) from locking block (2) and bumper lock (1).
2.
Remove capscrew (16), lockwasher (15), washer (14), retainer washer (13), thrust bushing (12), tire
carrier subassembly (4), and thrust bushing (8) from pivot mount (9). Discard lockwasher (15).
3.
Remove four locknuts (5), washers (6), capscrews (11), washers (10), large washers (17) and (18),
pivot mount (9), and mud flap (19) from bumper (7). Discard locknuts (5).
4.
Remove two locknuts (24), washers (23), capscrews (20), washers (21), and bumper lock (22) from
bumper (7). Discard locknuts (24).
1.
Install bumper lock (22) on bumper (7) with two washers (21), capscrews (20), washers (23), and
locknuts (24). Tighten locknuts (24) to 90 lb-ft (122 N
•
m).
2.
Install mud flap (19) and pivot mount (9) on bumper (7) with four large washers (17) and (18),
washers (10), capscrews (11), washers (6), and locknuts (5). Tighten locknuts (5) to 90 lb-ft (122 N
•
m).
3.
Install tire carrier subassembly (4) on pivot mount (9) with thrust busing (8), thrust bushing (12),
retainer washer (13), washer (14), lockwasher (15), and capscrew (16). Tighten capscrew (16) to
75 lb-ft (102 N
•
m).
4.
Install pin (3) on locking block (2) and bumper lock (1).
b. Installation
a. Removal
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Lockwasher (Appendix A, Item 174)
Six locknuts (Appendix A, Item 114.4)
Manual References
TB 9-2320-335-13&P, Appendix E
Maintenance Level
Unit
Back to Top
