TB-9-2320-335-13-P
TRUCK, UTILITY: EXPANDED CAPACITY, IAP/ARMOR READY
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE AND REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) INSTRUCTIONS
MAY 2008
TB-9-2320-335-13-P - Page 85 of 680
3-7.1. ENGINE OIL COOLER SUPPLY AND RETURN LINES MAINTENANCE
(SERIAL NUMBERS 300000 AND ABOVE) (Cont’d)
TB 9-2320-335-13&P
3-3
FOLLOW-ON TASKS: • Install oil filter (TM 9-2320-387-24-1).
• Install engine left splash shield (para. 10-23.1).
• Fill oil to proper level (TM 9-2320-387-10).
• Start engine (TM 9-2320-387-10) and inspect for leaks at engine oil cooler, supply,
and return lines.
FRONT
OF
VEHICLE
NOTE
Use of a longer capscrew may be necessary for installation of oil
lines bracket.
1.
Install three tiedown straps (5), (10), and (28) on engine oil and power steering lines.
2.
Install oil line (13) on oil lines bracket (23) with two clamps (6) and (7), lockwasher (18),
capscrew (19), washer (8), and locknut (9). Tighten locknut (9) to 6 lb-ft (8 N
•
m).
3.
Install oil line (13) on engine mount bracket (17) with two clamps (15) and (16) and capscrew (14).
4.
Install oil lines bracket (23) on steering gear case (24) with capscrew (20), lockwasher (21), and
washer (22).
5.
Install oil and power steering lines bracket (3) on airlift bracket (4) with capscrew (1), washers (2)
and (27), lockwasher (26), and locknut (25).
6.
Connect supply line connector (29) to oil cooler port (30).
7.
Connect supply line connector (12) to adapter (11).
c. Installation
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18
19
20
21
22
25
26
28
29
30
17
23
24
27
Back to Top
