TB-9-2350-277-40-P-3
CARRIER, MECHANIZED SMOKE OBSCURANT M58
TECHNICAL BULLETIN; INSTALLATION OF CREW II MODIFICATION KIT PART 3 OF 4
JUNE 2009
TB-9-2350-277-40-P-3 - Page 52 of 88
TB 9-2350-277-40&P-3
REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
0006 00
INTRODUCTION – Continued
0006 00-4
c.
Recoverability Code.
Recoverability codes are assigned to items to indicate the disposition action on
unserviceable items.
The recoverability code is entered in the fifth position of the SMR code as follows:
Recoverability
Code
Application/Explanation
Z
Nonreparable item.
When unserviceable, condemn and dispose of the item
at the level of maintenance shown in 3rd position of SMR code.
F
Reparable item.
When uneconomically reparable, condemn and dispose of
the item at the field level.
H
Reparable item. When uneconomically reparable, condemn and dispose of
the item at the below depot sustainment level.
D
Reparable item. When beyond lower level repair capability, return to depot.
Condemnation and disposal of item not authorized below depot level.
L
Reparable item. Condemnation and disposal not authorized below
Specialized Repair Activity (SRA).
A
Item requires special handling or condemnation procedures because of
specific reasons (e.g., precious metal content, high dollar value, critical
material, or hazardous material).
Refer to appropriate manuals/directives for
specific instructions.
K
Repairable item.
Condemnation and disposal to be performed at contractor
facility.
National Stock Number (Column (3))
.
The NSN for the item is listed in this column.
CAGE Code (Column (4))
.
The Commercial and Government Entity Code (CAGEC) is a 5-digit code which is
used to identify the manufacturer, distributor, or Government agency/activity that supplies the item.
Part Number (Column (5))
.
Indicates the primary number used by the manufacturer (individual, company, firm,
corporation, or Government activity), which controls the design and characteristics of the item by means of its
engineering drawings, specifications standards, and inspection requirements to identify an item or range of items.
NOTE
When you use an NSN to requisition an item, the item you
receive may have a different part number from the number
listed.
Description and Usable on Code (UOC) (Column (6))
.
This column includes the following information:
1.
The Federal item name and, when required, a minimum description to identify the item.
2.
Part numbers of bulk materials are referenced in this column in the line entry to be manufactured or
fabricated.
3.
Hardness Critical Item (HCI).
A support item that provides the equipment with special protection from
electromagnetic pulse (EMP) damage during a nuclear attack.
4.
The statement END OF FIGURE appears just below the last item description in column (6) for a given figure
in both the repair parts list and special tools list work packages.
QTY (Column (7))
.
The QTY (quantity per figure column) indicates the quantity of the item used in the breakout
shown on the illustration figure, which is prepared for a functional group, sub-functional group, or an assembly.
A
“V” appearing in this column in place of a quantity indicates that no specific quantity is applicable (e.g., shims,
spacers).
Back to Top
