TB-9-2350-277-40-P-3
CARRIER, MECHANIZED SMOKE OBSCURANT M58
TECHNICAL BULLETIN; INSTALLATION OF CREW II MODIFICATION KIT PART 3 OF 4
JUNE 2009
TB-9-2350-277-40-P-3 - Page 44 of 88
TB 9-2350-277-40&P-3
INSTALLATION PROCEDURES – Continued
0005 00
0005 00-10
NOTE
Do not secure cables with tie straps until installation is complete and
the cables have been adjusted at both ends.
9.
Route GPS senor cable (1) from hull opening along rerouted antenna cable and down turbine
housing wall to primary unit location.
10. Measure and pull GPS sensor cable (1) to extend 21 inches beyond clamp (40) to primary unit
location.
11. Secure cable (1) to rerouted antenna cable with tie straps (4).
Figure 9.
GPS Senor Cable Installation
Back to Top
