TB-9-2350-277-40-P-3
CARRIER, MECHANIZED SMOKE OBSCURANT M58
TECHNICAL BULLETIN; INSTALLATION OF CREW II MODIFICATION KIT PART 3 OF 4
JUNE 2009
TB-9-2350-277-40-P-3 - Page 36 of 88
TB 9-2350-277-40&P-3
INSTALLATION PROCEDURES – Continued
0005 00
0005 00-2
1.
Install GPS sensor, mounting bracket, and cable on vehicle.
a.
Clean GPS sensor mounting bracket mounting surface on hull with cleaning compound.
b.
Route GPS cable (1) through antenna opening, new gasket (5), and GPS sensor mounting
bracket (6).
c.
Connect GPS cable (1) to GPS sensor (2).
d.
Install GPS sensor (2) on GPS mounting bracket (6) and secure with two screws (3).
e.
Secure GPS cable (1) to GPS mounting bracket (6) with four tie straps (4).
f.
Position gasket (5) and GPS mounting bracket (6) over antenna opening.
Figure 1.
GPS Sensor, Mounting Bracket, and Cable Installation
Back to Top
