TB-9-2350-277-40-P-3
CARRIER, MECHANIZED SMOKE OBSCURANT M58
TECHNICAL BULLETIN; INSTALLATION OF CREW II MODIFICATION KIT PART 3 OF 4
JUNE 2009
TB-9-2350-277-40-P-3 - Page 39 of 88
TB 9-2350-277-40&P-3
INSTALLATION PROCEDURES – Continued
0005 00
0005 00-5
INSTALL GPS ANTENNA RISER
1.
Clean antenna riser mounting surface on hull with cleaning compound.
2.
Install new gasket (5) and antenna riser (18) over GPS antenna opening.
Secure with four
screws (20) and lockwashers (19).
TORQUE SCREWS TO 44 LB-FT (59.6 N
·
m).
3.
Install new gasket (5) and access cover (16) on antenna riser (18).
Secure with four screws (8),
six flat washers (15), two lockwashers (14), and four self-locking nuts (17).
TORQUE SCREWS
TO 44 LB-FT (59.6 N
·
m).
Figure 4.
GPS Antenna Riser Installation
Back to Top
