TB-9-2350-277-40-P-3
CARRIER, MECHANIZED SMOKE OBSCURANT M58
TECHNICAL BULLETIN; INSTALLATION OF CREW II MODIFICATION KIT PART 3 OF 4
JUNE 2009
TB-9-2350-277-40-P-3 - Page 38 of 88
TB 9-2350-277-40&P-3
INSTALLATION PROCEDURES – Continued
0005 00
0005 00-4
3.
Install new gasket (5) on GPS mounting bracket (6).
4.
Install SINCGARS antenna on vehicle.
a.
Reroute antenna cable (13) inside vehicle and through antenna opening, GPS mounting
bracket (6), and new gasket (5).
Connect antenna cable (13) to antenna base (9).
b.
Install SINCGARS antenna base (9) over gasket (5), GPS mounting bracket (6), and antenna
opening.
Secure with four screws (8) and retained lockwashers (7).
TORQUE SCREWS TO
44 LB-FT (59.6 N
·
m).
c.
Connect ground strap (10) to vehicle hull and secure with bolt (11) and two retained
lockwashers (12).
Figure 3.
SINCGARS Antenna Installation
Back to Top
