TB-9-2350-277-40-P-3
CARRIER, MECHANIZED SMOKE OBSCURANT M58
TECHNICAL BULLETIN; INSTALLATION OF CREW II MODIFICATION KIT PART 3 OF 4
JUNE 2009
TB-9-2350-277-40-P-3 - Page 32 of 88
TB 9-2350-277-40&P-3
MODIFICATION PROCEDURES – Continued
0004 00
0004 00-4
REROUTE SINCGARS ANTENNA CABLE
1.
Pull existing SINCGARS antenna cable (8) through original hull opening (7).
NOTE
Clamps and mounting hardware are to remain in their existing
location for reuse during GPS antenna cable installation.
2.
Remove antenna cable (8) from three clamps (6) and clamp (5).
Figure 3.
SINCGARS Antenna Cable Routing Before Modification
Back to Top
