TB-9-2350-277-40-P-3
CARRIER, MECHANIZED SMOKE OBSCURANT M58
TECHNICAL BULLETIN; INSTALLATION OF CREW II MODIFICATION KIT PART 3 OF 4
JUNE 2009
TB-9-2350-277-40-P-3 - Page 25 of 88
TB 9-2350-277-40&P-3
REMOVAL PROCEDURES
0003 00
0003 00-1
THIS WORK PACKAGE COVERS:
Remove SINCGARS Antenna (page 0003 00-1).
Remove Floor Plate and Hopper Baseplate Assembly Hardware (page 0003 00-2).
Remove Radio Rack Hardware (page 0003 00-3).
INITIAL SETUP:
Maintenance Level
Sustainment
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0011 00, Item 4)
Materials/Parts
Cleaning Compound (WP 0013 00, Item 1)
Personnel Required
Mechanic
Equipment Conditions
Carrier parked on level ground
Engine stopped (TM 9-2350-277-10)
Vehicle blocked (TM 9-2350-277-10)
Radio and mount removed
(TM 11-5820-498-12)
REMOVE SINCGARS ANTENNA
1.
Remove bolt (6), two lockwashers (5), and ground strap (8) from inside vehicle.
Retain hardware
for re-installation after modification.
2.
Disconnect cable (7) from antenna base (3).
3.
Remove four screws (2), lockwashers (1), antenna base (3), and gasket (4) from vehicle.
Discard
screws and gasket.
Retain antenna base and lockwashers for re-installation after modification.
4.
Scrape any remaining gasket material from mating surface.
Clean with cleaning compound.
Figure 1.
SINCGARS Antenna Removal
Back to Top
