TB 9-2350-277-40&P-3
REMOVAL PROCEDURES – Continued
0003 00
0003 00-2
REMOVE FLOOR PLATE AND HOPPER BASEPLATE HARDWARE
1.
Remove screw (12) and shouldered washer (13) securing floor plate (14) to carrier hull.
Retain
washer for re-installation. Discard screw.
2.
Remove two screws (11), lockwashers (10), and washers (9) securing hopper baseplate
assembly (15) to carrier hull.
Discard hardware.
Figure 2.
Floor Plate and
Assembly Hardware Removal