TB-9-2355-315-10-1
TECHNICAL BULLETIN
RG31A2/A3 LIFT AND TOW PROCEDURES
JUNE 2012
TB-9-2355-315-10-1 - Page 14 of 64
0002-4
0002
TB 9-2355-315-10-1
NOTE
LTAs must be positioned on crosstube with each adapter’s center support tube adjacent
to the end caps.
WARNING
LTAs are heavy, approximately 73 lbs: Lifting adapters less than 3 feet requires 1 male or 2
females.
Lifting LTAs higher
than 3 feet requires 2 males or 2 females.
Handle carefully or
serious personal injury may result.
Adapters and end caps may slide off when installing, and may cause personal injury.
9.
Install LTAs (15) on crosstube (7) with adapter center support tubes adjacent to the end caps, and aligned
such that shorter leg of adapter will connect to the tie down lugs and longer leg will connect to the tow lugs.
10. Install two end caps (10) on crosstube (7).
11. Install two pins (9) and quick pins (8).
12. Attach two springs (1) on tow cylinders (2).
Back to Top
