TB-9-2355-315-10-1
TECHNICAL BULLETIN
RG31A2/A3 LIFT AND TOW PROCEDURES
JUNE 2012
TB-9-2355-315-10-1 - Page 15 of 64
0002-5
0002
TB 9-2355-315-10-1
13. Remove two pin/lanyard assemblies and one bushing from each LTA assembly.
WARNING
Keep hands and fingers away from adapters and tow eyes when operating retrieval
system or serious personal injury or death may result.
NOTE
If disabled vehicle has tow shackles installed, remove shackles and stow in disabled vehicle.
14. Soldiers B and C each insert the bushings into the tie down lugs. For older variants of the RG31A2, the
bushing collar should be on the outside of the tie down lug, but for the newer and upgraded variants,
including the RG31A3, the collar may need to be on the inside of the tie down lug.
Back to Top
