TB-9-2355-315-10-1
TECHNICAL BULLETIN
RG31A2/A3 LIFT AND TOW PROCEDURES
JUNE 2012
TB-9-2355-315-10-1 - Page 36 of 64
TB 9-2355-315-10-1
0003
0003-4
WARNING
LTAs are heavy, approximately 73 lbs: Lifting adapters less than 3 feet requires 1 male or 2
females.
Lifting LTAs higher
than 3 feet requires 2 males or 2 females.
Handle carefully or
serious personal injury may result.
Adapters and end caps may slide off when installing, and may cause personal injury.
NOTE
LTAs must be positioned on crosstube with each adapter’s center support tube adjacent
to the end caps.
11. Install LTAs (15) on crosstube (4) with adapter center support tubes adjacent to the end caps, and aligned
such that that shorter leg of the adapter will connect to the rear tie down lugs.
12. Install two end caps (7) on crosstube (4).
13. Install two pins (9) and quick pins (8) on end caps (7).
14. Attach two springs (1) on tow cylinders (2).
Back to Top
