TB-9-2355-315-10-1
TECHNICAL BULLETIN
RG31A2/A3 LIFT AND TOW PROCEDURES
JUNE 2012
TB-9-2355-315-10-1 - Page 41 of 64
TB 9-2355-315-10-1
0003
0003-9
29. Install two brackets (34) in center holes of emergency tow lights (33) with two screws (35), washers (36),
and nuts (37).
30. Install emergency tow lights (30) on front of RG31A2 and fasten securely with straps (35).
31. Remove tow light cable (36) from stowage and connect to emergency tow lights (30).
32. Route other end of tow light cable (36) along disabled vehicle and connect to rear electrical connector (37)
on wrecker.
33.
Straighten and secure disabled vehicle’s steering wheel.
Back to Top
