TB-9-2355-315-10-1
TECHNICAL BULLETIN
RG31A2/A3 LIFT AND TOW PROCEDURES
JUNE 2012
TB-9-2355-315-10-1 - Page 49 of 64
TB 9-2355-315-10-1
0003
0003-17
16. With the LTAs disconnected from the towed vehicle, place the bushings and pin/lanyard assemblies in the
LTA holes and secure with the R-clips.
17. Drive wrecker forward a few feet and park (TM 9-2320-279-10-1,2, TM 9-2320-342-10-1).
WARNING
As springs and end caps are removed, crosstube can swing in all directions and
adapters may slide off and can cause personal injury.
18. Remove two springs (16) from tow cylinders (18).
19. Remove two quick pins (23) and pins (24) from end caps (25).
20. Remove two end caps (25) from crosstube (17).
WARNING
LTAs are heavy, approximately 73 lbs: Lifting adapters less than 3 feet requires 1 male or 2
females.
Lifting LTAs higher
than 3 feet requires 2 males or 2 females.
Handle carefully or
serious personal injury may result.
21. Remove two LTAs (6) from crosstube (17).
Back to Top
