TB-9-2355-315-10-1

TECHNICAL BULLETIN

RG31A2/A3 LIFT AND TOW PROCEDURES

JUNE 2012

  TB-9-2355-315-10-1 - Page 40 of 64

TB 9-2355-315-10-1
0003
0003-8
NOTE
Safety chains can be routed to safety chain hoop or towing shackles. Towing shackles
can be used only after towing cylinders are extended.
Adjust chain slack so safety chains do not touch the ground.
25. Route safety chains to end cap hooks (27) and through safety chain hoop (28) on wrecker, and secure with
safety shackles (29).
CAUTION
When routing safety chains, ensure that they will not bind on the retrieval system or drag
on the ground during turns, or damage to equipment may result.
26. Wrap two springs (1) around crosstube and secure.
27. Prepare disabled vehicle for towing (TM 9-2355-315-10).
28. Remove emergency tow lights (33) and two brackets (34) from stowage.


Back to Top