TB-9-2355-315-10-1
TECHNICAL BULLETIN
RG31A2/A3 LIFT AND TOW PROCEDURES
JUNE 2012
TB-9-2355-315-10-1 - Page 43 of 64
TB 9-2355-315-10-1
0003
0003-11
38.
Adjust slack in two 16 ft. (4.9 m) safety chains so chains between crosstube and wrecker are approximately
1 ft. (30 cm) off ground.
CAUTION
When routing safety chains, ensure that they will not bind on the retrieval system or drag on
the ground during turns, or damage to equipment may result.
39. Set POWER switch (41) to OFF position.
40. Set POWER switch (45) to OFF position.
41. Set PTO ENGAGE switch (46) to OFF position.
42. Turn on service drive lights (TM 9-2320-279-10-1,2, TM 9-2320-342-10-1).
43. Turn on emergency flashers on wrecker (TM 9-2320-279-10-1,2, TM 9-2320-342-10-1) and disabled vehicle
(RG31A2 operator’s manual).
44. Push in PARKING BRAKE control (48) and select desired gear (TM 9-2320-279-10-1,2, TM 9-2320-342-10-
1).
Back to Top
