TB-9-2510-251-13

TECHNICAL BULLETIN

OPERATOR AND FIELD MAINTENANCE; INSTALLATION MANUAL (INCLUDING REPAIR PARTS LIST); FOR ADD-ON-ARMOR (AoA) AIR CONDITIONING

AUGUST 2007

TB-9-2510-251-13 - Page 249 of 624

2-233

TB 9-2510-251-13

2-2.3

Installation of Air Conditioning Kit to M1097A2 Two-Door with O'Gara Hess

Add-on-Armor (Cont’d).

d. Install Refrigerant Hoses (Cont’d)

(14)

Connect Condenser.

a.

Four-door vehicles only:

Lubricate O-ring and install #6 female straight fitting on outlet

(smaller) fitting on condenser.

b.

Two-door vehicles only:

Lubricate O-ring and install #6 female 45° fitting (22) on outlet

(smaller) fitting on condenser.

c.

Lubricate O-ring and install #8 female straight fitting (23) to inlet (larger) fitting on

condenser.

d. Trim ends of #6 hose (24) from drier and connect to right fitting.

e. Trim ends of #8 hose (25) from compressor and connect to left fitting.

f.

Reinstall plywood panel on top of transmission tunnel by notching around drain hoses

and refrigerant lines.

(15)

Reinstall plywood panel on top of transmission tunnel by notching around drain hoses and

refrigerant lines.

23

24

22

25

Figure 2-236.

Condenser Connection