TB-9-2510-251-24
TECHNICAL BULLETIN
INSTALLATION, REMOVAL, AND PARTS INSTRUCTIONS FOR ADD ON ARMOR (AOA) AND ASSOCIATED COMPONENTS FOR HMMWV FAMILY OF VEHICLES (FOVs)
JULY 2005
TB-9-2510-251-24 - Page 35 of 212
TB 9-2510-251-24
1-25
a. Installation
1)
Install C-partition rubber as follows (see figure 1-11).
a.
Cut rubber strip (1) as shown in figure 1-11.
Apply double-sided tape to one side of rubber strip (1).
b.
Clean application area with denatured alcohol.
c.
Apply rubber strip (1) to vehicle as shown in figure 1-11.
3-1/4 IN.
1
Figure 1-11.
C-Partition Rubber Installation (4 Door Only)
Back to Top
