TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 276 of 704
TB 9-3950-253-13&P
0027-2
0027
REMOVAL
00027
WARNING
During these procedures, personnel are required to work outside the vehicle where there
are several projecting parts, and personnel are required to bend down. Take care when
bending and straightening. A hard hat is required. Failure to follow this warning may result
in injury to personnel.
NOTE
Perform steps 1 through 3 for both right and left sides.
1. Remove clip (Figure 1, Item 7) from bolt (Figure 1, Item 2).
2. Remove bolt (
Figure 1, Item 2) and transport lock adjustable strut (Figure 1, Item 3) from bracket (Figure 1,
Item 1).
3. Remove nut (
Figure 1, Item 6), bolt (Figure 1, Item 4), and transport lock adjustable strut (Figure 1, Item 3)
from pin (Figure 1, Item 5).
Figure 1.
Transport Lock Adjustable Strut.
0027
1
2
3
5
6
7
8
9
4
Back to Top
