TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 284 of 704
TB 9-3950-253-13&P
Change 1
0029-2
0029
REMOVAL
00029
WARNING
During these procedures, personnel are required to work outside the vehicle where there
are several projecting parts, and personnel are required to bend down. Take care when
bending and straightening. A hard hat is required. Failure to follow this warning may result
in injury to personnel.
Twistlock Sensor Harness Removal
00029
NOTE
•
Tag wires and connectors upon removal to aid in installation.
•
Note routing of wires and harnesses to aid in installation.
•
Perform steps 1 through 3 for both right and left sides.
1. Disconnect twistlock sensor harness (Figure 1, Item 1) from twistlock sensor (Figure 1, Item 2).
Figure 1.
Twistlock Sensor Harness Disconnect.
0029
1
2
Back to Top
