TM-1-1500-344-23-2
AIRCRAFT VOLUME II
TECHNICAL MANUAL; CLEANING AND CORROSION CONTROL
APRIL 2009
TM-1-1500-344-23-2 - Page 55 of 240
NAVAIR 01-1A-509-2
TM 1-1500-344-23-2
15 April 2009
a. Sliding motion applications, such as plain spherical
bearings, flap tracks, hinges, threads, and cam surfaces;
b. Where conventional lubricants are difficult to apply
or retain, or where other lubricants may be easily
contaminated by dirt or dust;
c. Where a solvent resistant lubricant is required.
d. If mechanisms are operated at infrequent intervals
or are lubricated for life.
e. When long term corrosion protection is required
under static conditions (2 years outdoor storage or 5
years indoor storage).
2-13.3.3. MIL-PRF-46010 (Lubricant, Solid Film, Heat
Cured, Corrosion Inhibiting, Low VOC Content). This
lubricant is a heat cured, corrosion-inhibiting solid film
lubricant with extended wear life. MIL-PRF-46010
replaces MIL-L-46010 Type III. Limitations and uses
are the same as described for AS 5272 Type I above. In
addition, engineering authorization to substitute
MIL-PRF-46010 for AS 5272 is required prior to use.
2-13.3.4. MIL-L-23398 (Lubricant, Solid Film, Air Cured,
Corrosion Inhibiting). This lubricant is an air-cured,
corrosion-inhibiting solid film lubricant which may also
be used to repair surfaces originally coated with AS 5272/
MIL-PRF-46010. It can be used on aluminum, steel and
titanium. It provides moderate wear life and corrosion
protection in areas where it is not feasible to use a solid
film lubricant that requires curing at elevated
temperatures.
2-31/(2-32 Blank)
Back to Top
