TM-1-1730-227-13-P
STANDARD AIRCRAFT MAINTENANCE TRAILER PART NO. 4920-EG-081
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TM-1-1730-227-13-P - Page 50 of 138
0013 00
TM 1-1730-227-13&P
REMOVAL
1.
Remove two hex head bolts (Figure 1, Item 1), hex nuts (Figure 1, Item 2), and helical lock washers (Figure
1, Item 3) securing rail stop assembly (Figure 1, Item 4) to rail (Figure 1, Item 5).
2.
Remove rail stop assembly (Figure 1, Item 4) from rail (Figure 1, Item 5).
INSTALLATION
1.
Position rail stop assembly (Figure 1, Item 4) on rail (Figure 1, Item 5).
2.
Install two hex head bolts (Figure 1, Item 1) through the rail stop assembly (Figure 1, Item 4) into the rail
(Figure 1, Item 5).
3.
Install a helical lock washer (Figure 1, Item 3) and a hex nut (Figure 1, Item 2) on each hex head bolt (Figure
1, Item 1). Tighten hex nuts (Figure 1, Item 2) to a torque of
72 in-lbs
.
END OF WORK PACKAGE
0013 00-2
Back to Top
