TM-1-1730-227-13-P
STANDARD AIRCRAFT MAINTENANCE TRAILER PART NO. 4920-EG-081
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TM-1-1730-227-13-P - Page 56 of 138
0015 00
TM 1-1730-227-13&P
REMOVAL
NOTE
There are two types of channels used on the trailer undercarriage. One type has only two holes
and the other type has four holes.
1.
Remove two hex head screws (Figure 1, Item 4), flat washers (Figure 1, Item 3) and lock nuts (Figure 1, Item
2) securing channels to the trailer undercarriage (Figure 1, Item 5).
2.
Remove channel (Figure 1, Item 1).
INSTALLATION
1.
Position channel (Figure 1, Item 1) on trailer undercarriage (Figure 1, Item 5) as noted during removal Step 1.
2.
Install two hex head screws (Figure 1, Item 4), flat washers (Figure 1, Item 3) and lock nuts (Figure 1, Item 2)
to secure channel (Figure 1, Item 1) to trailer undercarriage (Figure 1, Item 5). Tighten lock nuts (Figure 1,
Item 2) to a torque of
540 in-lbs
.
END OF WORK PACKAGE
0015 00-2
Back to Top
