TM-1-1730-227-13-P
STANDARD AIRCRAFT MAINTENANCE TRAILER PART NO. 4920-EG-081
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TM-1-1730-227-13-P - Page 49 of 138
TM 1-1730-227-13&P
0013 00
STANDARD AIRCRAFT MAINTENANCE TRAILER
PART NO. 4920-EG-081 NSN 1730-01-086-1653
RAIL STOP ASSEMBLY
INITIAL SETUP:
Tools and Special Tools
Tool Kit, Aircraft Maintenance, (WP 0036 00, Item 2)
Wrench, Torque 30-200 in lb, 1/4 drive
(WP 0036 00, Item 4)
Personnel Required
MOS 15H
INSPECTION OF INSTALLED ITEMS
Figure 1.
Rail Stop Removal and Installation.
1.
Check rail stop assembly for bent or broken stop pin. Check for missing or broken spring or pull ring.
2.
Check rail stop assembly for operation. Make certain stop pin retracts by pulling down on ring and returns
when ring is released.
REPAIR OR REPLACEMENT
1.
Remove burrs from end of stop pin using the appropriate file contained in the tool kit.
2.
Remove dirt and obstructions from spring.
3.
Replace with new rail stop assembly if required.
0013 00-1
Back to Top
