TM 3-1040-279-12&P
NOTE
Proper fog oil flow must be delivered to generator within 5 seconds after
starting to ensure that high temperature thermal switch does not shut down
pulse jet engine.
c. Stopping.
To shut down smoke generator, proceed as follows:
(1)
Turn FOG OIL FLOW control knob fully clockwise to increase fog oil flow. Wait 3 seconds
(approximately 500°F on SMOKE TEMP indicator).
(2)
Set FOG OIL switch to OFF and allow excess fog oil to burn off.
(3)
Set ENGINE switch to OFF.
(4)
Follow steps 2-9b (4 through 8) for stopping under usual conditions (P. 2-12).
Change 4
2-15/(2-16 Blank)