INSTALLATION - Continued
466-0067a
3
4
5
8
1
1
2
2
6
7
Figure 2.
Air Brake Chamber Replacement.
END OF TASK
LEAKAGE TEST
1.
Coat air chamber flange with soap and water solution to all air fittings and inspect for leaks.
2.
If any leaks are detected, tighten securing hardware sufficiently to stop leaks. No leakage is allowed.
3.
Check non-pressure side of air chamber for leaks by applying soap and water solution to holes in chamber
body. If leakage exists, replace air chamber.
END OF TASK
FOLLOW ON TASK
Connect and adjust slack adjuster (WP 0059).
END OF TASK
END OF WORK PACKAGE
TM 5-2330-325-13&P
0069
0069-5/blank