TM 5-2330-378-14&P
4-61. MIDDLEAIR RESERVOIRAND DRAINCOCKREPLACEMENT(M870)(continued).
2.
Remove screw (4), two washers (5), and nut (6)from drain cock (7) and drain cock control lever(8). Removecontrol
lever (8) from drain cock (7) and grommet (9).
7
8
8
7
5
6
4
6
BRACKETANDMULTIFLINCTION
9
VALVE OMITTED FOR CLARITY
3.
Remove four screws (110),lockwashers (11), and nuts (112)from two air reservoir mounting brackets (13). Discard
lockwashers.
4.
Remove multifunction valve (2) and valve mounting bracket (14), as a unit, from two air reservoir mounting brackets
(13).
5.
Remove middle air reservoir (3) from two
3
air reservoir mounting brackets (113).
6.
Unscrew and remove drain cock (7) from
middle air reservoir (3).
b.
INSTALLATION
Is
1.
Install drain cock (7) on middle
air reservoir (3).
13
7
14
2.
Position middle air reservoir
13
(3)on two airreservoirmounting
brackets (113).
3.
Install multifunction valve (2) and valve
2
mounting bracket (14) on frame by placing
12
valve mounting bracket (14) between two
air reservoir mounting brackets (13) and
middle air reservoir (3) end brackets (15).
4@
Secure middle air reservoir (3) and valve mounting bracket (114)to two air reservoir mounting brackets (113)with
fournuts (12), newlockwashers(Il),
and screws (10).
4-133