TM 5-2330-378-14&P
4-57. MULTIFUNCTIONVALVE MOUNTINGBRACKETREPLACEMENT(M870).
ThisTaskCovers:
a.
Removal
b.
Installation
InitialSetup:
Toolsrrest Equipment:
Equipment Conditions:
- Tool kit, general mechanic's: automotive
- Air reservoir drained and drain cocks open (para 3-8).
(Item 7, Appendix B)
- Planks removed from stowed position (para2-8).
- Multifunction valve removed (para 4-55).
Materials/Parts:
• Detergent (Item 4, Appendix F)
• Tape, antiseizing (Item 21, Appendix F)
• Lockwasher (4) (Item 16, Appendix 1)
a.
REMOVAL
I
Remove fourscrews (1), lockwashers (2), and nuts (3)from multifunction valve mounting bracket (4)and middle
air reservoir (5). Discard lockwashers.
2.
Remove mounting bracket (4)from middle air reservoir (5).
b.
INSTALLATION
1.
Install mounting bracket (4) on middle air reservoir (5).
2.
Install four nuts (3), new lockwashers (2), and screws (1)on mounting bracket (4) and middle air reservoir (5).
01
6
4
4
FOLLOW-ONTASKS:
2
-Install multifunction valve (para4-55).
2
• Close drain cocks (para 3-8).
• Pressurize air system (para 3-8).
3
• Check airbrake system for leaks (Table 2-1,
3
item numbers 11 and 13).
• Check operation of brakes (subpara 4-54c).
• Stow planks (para 2-10).
4-124