TM-5-2330-378-14-P

SEMITRAILER, LOWBED: 40 TON CONSTRUCTION EQUIPMENT TRANSPORTER M870 AND M870A1

TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JUNE 1999

TM-5-2330-378-14-P - Page 253 of 524

TM 5-2330-378-14&P

4-79. DATA PLATEREPLACEMENT(M870)(continued).

3.

Drill out drive screw holes (4).

WARNING

Drycleaning solvent is toxic and flammable. Always wear protective goggles and

gloves and use only In a well-ventilated area. Avoid contact with eyes, skin, and

clothes and DO NOT breathe vapors. DO NOT use near open flame or excessive heat.

4.

If data plate (2) is attached with adhesive, scrape it off frame (3) with putty knife. Thoroughly

clean frame with

drycleaning

solvent and rag.

3

3

4

2

2

0

1

b.

INSTALLATION

NOTE

If replacing

adhesive

attached

plate,

do

step

1 only.

For

plate

attached

with

drive

screws, do step 2 only.

1 .

Peel protective backing from data plate (2) and apply to frame (3) at location of old data plate.

2.

Place data plate (2) in position on frame (3) and secure with four drive screws (1).

FOLLOW-ONTASKS:

- None

4-166