TM-5-2330-378-14-P

SEMITRAILER, LOWBED: 40 TON CONSTRUCTION EQUIPMENT TRANSPORTER M870 AND M870A1

TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JUNE 1999

TM-5-2330-378-14-P - Page 245 of 524

TM6-2330-378-14&P

4-73. HOOKFASTENERREPLACEMENT(continued).

NOTE

The M870 does not have a nut.

2.

Remove fastener spring (3), washer (4), nut (5), and hook fastener (1) from frame (2)-

b. INSTALLATION

1.

Have assistant push hook fastener (1) through outside of frame (2) as far as possible and hold in position.

NOTE

The M870 does not have a nut. Weld washer to hook fastener.

2.

Install fastener spring (3) and washer (4) on hookfastener(l)

and push against inside of frame (2) as faras possible

without squeezing fastener spring (3). For the M870, weld washer (4) on hook fastener (1). FortheM870A1,

install nut (5) on hook fastener (1).

3.

Weld nut (5) and washer (4) to hook fastener (1) (refer to TC 9-237).

FOLLOW-ONTASKS:

- None

4-157