TM-5-2330-378-14-P

SEMITRAILER, LOWBED: 40 TON CONSTRUCTION EQUIPMENT TRANSPORTER M870 AND M870A1

TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JUNE 1999

TM-5-2330-378-14-P - Page 264 of 524

TM 5-2330-378-14&P

5-1.

24-VOLT RECEPTACLE REPAIR (M870A1) (continued).

b.

ASSEMBLY

1 .

Slide nut (1) onto wires (2) with threads facing outward.

2.

Put ends of wires (2) into back of grommet (3). Make sure wires (2) are matched with the corresponding pin

letters printed on face of grommet (3).

3.

Strip insulation on ends of wires (2) equal to depth of solder well in pins (4). Place solder well on ends of wires

(2) and solder.

4.

Coat receptacle assembly grommet (5) with light film of technical petroleum.

5.

Install each pin (4) in rear of receptacle assembly grommet (5). Make sure the identifying letters are matched

with the corresponding letters printed on face of grommet (3).

6.

Push pins (4) into grommet (3) until seated. Push grommet (3) into receptacle assembly.

7.

Install nut (1) on receptacle assembly grommet (5) and hand-tighten.

2

3

5

00

4

0

000

FOLLOW-ON TASKS:

* Install 24-volt receptacle (pare 4-37).

5-2