TM-5-2330-378-14-P
SEMITRAILER, LOWBED: 40 TON CONSTRUCTION EQUIPMENT TRANSPORTER M870 AND M870A1
TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
JUNE 1999
TM-5-2330-378-14-P - Page 331 of 524
TM 5-2330-378-14&P
B-3.
EXPLANATIONOF COLUMNSINSECTIONII, MAINTENANCEALLOCATIONCHART
FOR SEMITRAILER, LOWBED: M870 AND M870A1 (continued).
C ...............
Operator/Crew
0 ...............
Unit
F ................
Direct Support
H ...............
General Support
D ...............
Depot
e.
(5) Tool or Test Equipment
Reference
Code.
Column 5 specifies,
by code, those common
tool sets (not
individual tools), common TMDE, special tools, special TMDE, and special support equipment required to
perform the designated maintenance function. Codes are keyed to tools and test equipment listed in Section
Ill.
f.
(6) Remarks.
When
applicable,
this column
contains
a letter code that is keyed to remarks
contained
in
Section IV. If there is nothing in the Remarks column, there is no Section IV.
B-4. EXPLANATION OF COLUMNS IN SECTION III, TOOL AND TEST EQUIPMENT
REQUIREMENTS.
a.
(1) Tool or Test Equipment
Reference
Code.
This code correlates with the code used in Section 11,Column
5.
b.
(2) Maintenance
Level.
The symbol designation
shown indicates the lowest level of maintenance
authorized
to use the tool or test equipment.
C.
(3)
Nomenclature.
This
is the
name
or identification
of the
tool
or test
equipment.
d.
(4) National
Stock Number.
This is the national stock number of the tool or test equipment.
a.
(5) Tool Number.
This is the manufacturers
part number.
B-5.
EXPLANATION OF COLUMNS IN SECTION IV, REMARKS.
a.
(1) Reference
Code.
This is the code recorded
in Section
11,Column
6.
b.
(2) Remarks.
This column provides
information
pertinent
to the maintenance
function
being performed
as
indicated in the MAC, Section II.
B-3
Back to Top
