TM-5-2350-377-13-P
ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER
JUNE 2012
TM-5-2350-377-13-P - Page 188 of 404
INSTALLATION
WARNING
•
Do not stand or work under apron and dozer assembly unless apron lockpins are
installed. Failure to comply may result in severe injury or death to personnel.
•
Do not lift apron and dozer assembly with dozer blade installed unless dozer lockpins are
installed. Failure to comply may result in severe injury or death to personnel.
•
Lifting device must have a weight capacity greater than 2,944 lb (1,337 kg).
•
Personnel must stand clear during lifting operations. A swinging or shifting load may result
in injury to personnel.
1.
Connect chain (Figure 23, Item 2) and lifting device (Figure 23, Item 3) to lifting eye shackles
(Figure 23, Item 1) of apron and dozer assembly (Figure 23, Item 4). If dozer blade (Figure 23, Item 5) is
installed, connect a chain between lifting device and shackle (Figure 23, Item 6) at back side of dozer blade
(Figure 23, Item 5). Tighten chain enough to remove slack.
2.
Lift apron and dozer assembly (Figure 23, Item 4) and position on vehicle.
5
M0040HBF
6
1
2
3
1
4
Figure 23.
Apron and Dozer Assembly Installation.
TM 5-2350-377-13&P
0036
0036-22
Back to Top
