TM-5-2350-377-13-P

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER

JUNE 2012

TM-5-2350-377-13-P - Page 222 of 404

REMOVAL - Continued

NOTE

There is an additional clamp on left hydraulic track adjusting cylinder.

2.

Remove screw (Figure 2, Item 6), washers (Figure 2, Item 4), locknut (Figure 2, Item 3), and pin

(Figure

2,

Item

5). Disconnect rod end (Figure 2, Item 2) of hydraulic track adjusting cylinder

(Figure

2,

Item

1) from final drive adjusting flange (Figure 2, Item 7). Discard locknut.

7

M0074HBF

1

2

3

4

5

4

6

Figure 2.

Final Drive Adjusting Flange Removal.

NOTE

Screw must be removed from bottom when connecting fixed end of cylinder to hull.

3.

Remove screw (Figure 3, Item 6), washers (Figure 3, Item 3), locknut (Figure 3, Item 2), pin

(Figure

3,

Item

1), and fixed end of track adjusting cylinder (Figure 3, Item 4) from hull mounting bracket

(Figure

3,

Item

5). Discard locknut.

M0075HBF

5

4

3

2

3

6

1

Figure 3.

Track Adjusting Cylinder Rod End Removal.

END OF TASK

TM 5-2350-377-13&P

0043

0043-2