FIELD MAINTENANCE
TRACK ADJUSTING CYLINDER ASSEMBLY REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
(WP
0071, Table 1, Item 7)
Parts Kit, Hydraulic (WP
0071, Table 1, Item 4)
Wrench, Torque, Click, Ratcheting, 3/8 in. Drive
(75 ft-lb) (WP
0071, Table 1, Item 13)
Materials/Parts
Cleaning Compound, Solvent
(WP
0070, Table 1, Item 6)
Grease, Automotive and Artillery (GAA)
(WP
0070, Table 1, Item 13, 14, 15, 16, 17)
Lubricating Oil, Engine
(WP
0070, Table 1, Item 18, 19, 20)
Materials/Parts (cont.)
Nut, Self-Locking (WP
0056, Figure 11, Item 15)
Qty:
1
Nut, Self-Locking (WP
0060, Figure 20, Item 1)
Qty:
4
Personnel Required
Construction Equipment Repairer, 91L
Equipment Condition
Right, center, and left rear floor plates removed
(TM 5-2350-262-10)
Hydraulic system pressure relieved
(TM 5-2350-262-20)
REMOVAL
1.
Remove locknut (Figure 1, Item 4), washer (Figure 1, Item 3), and rear fuel tank strap (Figure 1, Item 1) from
hull (Figure 1, Item 2). Discard locknut.
1
M0073HBF
2
3
4
Figure 1.
Rear Fuel Tank Strap Removal.
TM 5-2350-377-13&P
0043
0043-1