TM-5-2350-377-13-P
ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER
JUNE 2012
TM-5-2350-377-13-P - Page 224 of 404
INSTALLATION - Continued
NOTE
•
There is an additional clamp on left hydraulic track adjusting cylinder.
•
Coat threads of screw and nut with lubricating oil prior to installation.
4.
Connect rod end (Figure 6, Item 2) of hydraulic track adjusting cylinder (Figure 6, Item 1) to final drive adjusting
flange (Figure 6, Item 7) with pin (Figure 6, Item 5), washer (Figure 6, Item 4), screw (Figure 6, Item 6), washer
(Figure 6, Item 4), and new locknut (Figure 6, Item 3).
7
M0078HBF
1
2
3
4
5
4
6
Figure 6.
Final Drive Adjusting Flange Installation.
5.
Tighten locknuts (Figure 7, Item 2) to 19 to 31 lb-ft (25.8 to 42 N·m).
6.
Lubricate bearings (Figure 7, Item 4) with Grease, Automotive and Arillery (GAA) at lubrication fittings
(Figure 7, Items 1 and 3).
2
M0079HBF
1
2
3
4
4
Figure 7.
Track Adjusting Cylinder Locknuts Installation.
TM 5-2350-377-13&P
0043
0043-4
Back to Top
